| Home | Arbor, Forestry & Logging Equipment | Skid Steer Attachments & Tracks | Contact Us |

Worksaver 3-Point & Skid Steer Stump Grinders

Customer Testimonials:
"I was very pleased with the performance of this machine. I ground down 4 stumps today with the Worksaver Grinder. The stumps were 30" in diameter, and with my John Deere 5075M they were gone in less than 1/2 hour. Thanks to the sales rep for leading me to the machine to meet my needs and at a reasonable price, too!" - A Very Satisfied Customer, Texas

Economical and Efficient PTO powered stump grinder, makes stump removal fast and easy. Operator easily controls the stump grinder from the comfort of the tractor seat.

FEATURES


  • Maneuverable - goes anywhere a tractor can; gets into tight places.
  • Higher productivity via it's unique cutting wheel design.
  • Cutting wheel design provides a smoother cutting action.
  • Easy to operate - hydraulic controls allow easy operation from the tractor seat using existing tractor hydraulic controls.
  • Durable carbide-tipped cutting teeth are economical and easy to replace.
  • Harden bushings used in major pivot points for increased reliability.
  • Grease zerks provided at major pivot points for extended service life.
  • Standard needle valve for precise control of cutting feed rate for best cutting action.
  • SureFoot stabilizer bar provides solid footing during operation.
  • Rubber deflector helps control chips and debris during grinding.
  • Parking stand for easy storage.
  • Tractor models require two pair of remote hydraulic outlets.
  • Hydraulic model has quick attach universal skid steer hitch system.
  • Skid steer unit has hydraulic solenoid valve requiring only one pair of remote hydraulic outlets.
  • Hydraulic Stump Grinder - Mounts to a "Universal" skid steer quick attach hitch system. Easy to operate from the seat of the skid steer using existing hydraulic controls.

SPECIFICATIONS
  SG-26A SG-36A
Hitch Cat. I Cat. I / II
Overall Length (est.) 75" 80"
Drive System Slip Clutch PTO / Series 5 Slip Clutch PTO / Series 6
PTO Speed 540 RPM
Drive System Protection Slip Clutch
Gearbox Rating / Ratio 60 HP / 1:1.5 100 HP / 1:1.46
Cutting Wheel Construction --Welded 2-Piece Laminated Steel--
Cutting Wheel Thickness -------3/4"-------
Cutting Wheel Diameter 26" 36"
Cutting Wheel Speed @ 540 PTO RPM 810 RPM
5,515 ft./min
788 RPM
7,430 ft./min
Number of Teeth 33 42
Cutting Teeth Construction -------Carbide Steel Bolt In-------
Cutting Height Above Ground 18"
Cutting Depth Below Ground 10" 15"
Max. Cut Depth Per Pass 5" 8"
Maximum Horizontal Cut 28" 33"
Swing Arc 45 Degrees
Min. Power / Flow Required 22 PTO HP 45 PTO HP
Max. Power / Flow 50 PTO HP 100 PTO HP
Drive System PTO / Series 5 PTO / Series 6
PTO Speed 540 RPM 540 RPM
Weight (est.) 660 lbs. 880 lbs.
  • Read and understand Operator's Manual before operation.
  • Stump Grinder will put a heavy load on the rear of your tractor. Be sure front of tractor is properly counterbalanced with weights.
  • Never allow children or bystanders around tractor or stump grinder when you are using equipment.


Copyright 2004 - 2013 by Iowa Farm Equipment